Door Down

HP32-SM StrongMesh Communicating Gas/Electric Thermostat

Related Products
Other Details
Product Videos
Also Viewed
  • Product Description

    The HP32-SM is a three stage heat, two stage cool heat pump StrongMesh communicating thermostat designed for new or replacement commercial or conventional residential applications where there is a need to network, remotely access, monitor and/or control settings on multiple thermostats. The thermostat works with the WCM-2 wireless coordinator and the NT-IPXB network thermostat controller. The included StrongMesh backplate allows wireless mesh networking and complete remote control. This class of thermostats represent the latest in solid-state surface mount electronics and manufacturing techniques incorporated into an extremely low-profile, ultra-slim white ABS plastic case. A direct-wire, easy-to-install subbase mounts directly on a standard vertical outlet box or any drywall surface using hardware provided.


    • Selectable Celsius or Fahrenheit temperature display
    • Fan selector for continuous fan operation
    • Built-in short cycle protection & anticipation and droop
    • Front panel lockout with 1 or 3 hour temporary override; +/-3oF adjustment during override
    • Day/Night (Occupied/Unoccupied) button allows setpoint setback for energy savings
    • No battery required (maintains last setpoint/mode of operation following power outages)
    • Lockable access cover
    • Automatic changeover from heat-to-cool and cool-to-heat
    • 2oF (1oC) minimum Heat/Cool separation
    • Selectable minimum on/off time (2 or 4 minutes)
    • Optional remote indoor, outdoor and duct sensing modules
    • Complete control and status via Net/X controller & wireless coordinator

    Technical Specs

    • Specifications:
    • Rated Voltage: 20 to 30Vac, DC 24 nominal
    • Rated A.C. Current: 0.05 to 0.75 Amp continuous per output with surges to 3 Amps maximum
    • Rated D.C. Current: 0.0 to 0.75 Amp continuous per output with surges to 3 Amps maximum
    • Control Range: Heating: 38-88oF in 1o steps (6-30oC in 1o steps)
    • Cooling: 60-108oF in 1o steps (16-40oC in 1o steps)
    • Thermostat Measurement Range: 28 - 124oF or 0 - 48oC
    • Control Accuracy: +/- 1oF @ 68oF (0.5oC @ 20oC
    • Minimum Deadband: (between heating and cooling) 2oF or 1oC
    • Dimensions: 4.5" H x 4" W x 7/8" D (114mm x 102mm x 22mm)
    • Equipment Terminations: R-switching voltage, W1-aux/emer heat, Y1-compressor 1, Y2-compressor 2, G-fan, O/B-reversing valve
    • Power Terminations: 24V - power, 24V(c) - power common
    • Communication Terminations: StrongMesh Wireless
    • Sensor Terminations: RS+V - sensor power, RS1 - comm(+), RS2 - comm(-)
    • Setback Terminations: CLK1, CLK2 dry contact closure
    • Note: This thermostat contains electronic circuitry that replaces the conventional mechanical anticipator.