www.networkhvac.com

• Home
• About Us
• Contact Us
• Ordering FAQ

Home > Net/X Network Thermostats >   HP32-NX Network Communicating Heat Pump Thermostat
	Retail Price $375.00 Qty:

Description Technical Specs   The HP32-NX communicating thermostat is designed for new or replacement commercial or conventional residential heat pump applications where there is a need to network, remotely access, monitor and/or control settings on multiple thermostats.  The HP32-NX is a 3 Heat Stage/2 Cool Stage model for gas, electric and heat pump systems.  All models offer "user-friendly" control of the heating/cooling equipment along with an easy-to-read vertical LCD that displays complete operating status.  An included 2-wire communications port allows complete remote control and status with a hardware adapter, internet access or telephone model dial-up.    This class of thermostats represent the latest in solid-state surface mount electronics and manufacturing techniques incorporated into an extremely low-profile, ultra-slim white ABS plastic case.  A direct-wire, easy-to-install sub-base mounts directly on a standard vertical outlet box or any drywall surface using hardware provided.  For use with two-stage heating and one stage cooling systems.  This is a direct replacement for the HPT-2.     HP32-NX Operation and Installation HP32-NX Features and Technical Specifications Specifications: Rated Voltage:  20 to 30Vac, DC 24 nominal Rated A.C. Current:  0.05 to 0.75 Amp continuous per output with surges to 3 Amps maximum Rated D.C. Current:  0.0 to 0.75 Amp continuous per output with surges to 3 Amps maximum Control Range: Heating: 38-88oF in 1o steps (6-30oC in 1o steps)                        Cooling:  60-108oF in 1o steps (16-40oC in 1o steps) Thermostat Measurement Range:  28 - 124oF or 0 - 48oC Control Accuracy:  +/- 1oF @ 68oF (0.5oC @ 20oC Minimum Deadband:  (between heating and cooling) 2oF or 1oC Dimensions:  4.5" H x 4" W x 7/8" D (114mm x 102mm x 22mm) Equipment Terminations:  R-switching voltage, W1-aux stage 1, Y1-compressor stage 1, Y2-compressor stage 2 on HPT-2 only, G-fan, O/B-reversing valve cool/heat, LED1-light, LED2-light on HPT-2 only Power Terminations:  24V - power, 24V(c) - power common Communication Terminations:  X1 - comm(+), X2 - comm(-) Sensor Terminations:  RS+V - sensor power, RS1 - comm(+), RS2 - comm(-) Setback Terminations:  CLK1, CLK2  dry contact closure Note:  This thermostat contains electronic circuitry that replaces the conventional mechanical anticipator. Features Selectable Celsius or Fahrenheit temperature display Fan selector for continuous fan operation Built-in short cycle protection & anticipation and droop Auxiliary Heat and Emergency Heat Capable High and Low Balance Points Available with NT-ODT Sensor Front panel lockout with 1 or 3 hour temporary override;  +/-3oF adjustment during override Day/Night (Occupied/Unoccupied) button allows setpoint setback for energy savings No battery required (maintains last setpoint/mode of operation following power outages) Lockable access cover Automatic changeover from heat-to-cool and cool-to-heat 2oF (1oC) minimum Heat/Cool separation Selectable minimum on/off time (2 or 4 minutes) Optional remote indoor, outdoor and duct sensing modules Complete control and status via Net/X controller

Accessories for this product... WBM-1 Wireless Thermostat Backplate Module Our Price: $155.00 Add NT-FS Flush Mount Remote Sensor Retail Price $37.00 Add NT-DUCT Remote Indoor Duct Temperature Sensor Retail Price $97.00 Add NT-IDS Remote Indoor Temperature Sensor Retail Price $77.00 Add NT-ODT Remote Outdoor Temperature Sensor Retail Price $82.00 Add

Share your knowledge of this product with other customers... Be the first to write a review

Browse for more products in the same category as this item: Net/X Network Thermostats

	GE22-NX Network Communicating Gas/Electric Thermostat $375.00
	NT-SSA32/CLK 32 Thermostat Network Controller $499.00
	NT-SSA16/CLK 16 Thermostat Network Controller $399.00